Magnepress® System Specifications

A typical Magnepress® System installation is shown below:

:wpe7.jpg (43885 bytes)

·         Magnepress® System Advantages

·         Magnepress® Power Supply Modules

·         Magnepress® Forming Coils

·         Magnepress® Controls

·         Magnepress® Material Handling

 


Magnepress® System Advantages

·         Modular/Re-configurable

·         Compact

·         No Special Installation Infrastructure

·         Integrates in Existing Line or Operates as Standalone Cell

·         Low Power Consumption

·         Environmentally Friendly

·         Low Maintenance Requirements

 Return to Top


Magnepress® Power Supply Modules

 

·         Total Energy: 22.5 kJ per Modulewpe8.jpg (23095 bytes)

·         Peak Voltage: 15 kV Rating

·         Peak Current: 100 kA Peak per Module

·         Cycle Rate: High Energy/High Rate Requires Active Cooling

·         Rated Capacitor Life: 20 Million Cycles

·         Rated Ignitron Life: 20 Million Cycles

·         Dimensions: 2’ x 4’ x 4’

·         Control Interface: PLC

·         Sealed Enclosure

 

 Return to Top 


  Magnepress® Forming Coils

 

 

Compression Coils (Tubular Shapes)wpe5.jpg (8168 bytes)

·         wound

·         wound on shaper

·         plate coils

                                              

 

 

 

Expansion Coils (Tubular Shapes)    wpe6.jpg (10046 bytes)

·         wound on mandrel

 

  

Flat Sheet Forming

·         wire wound pancake

·         flat bar coils

 

 Return to Top